Windigo ECO-Universal Oil Package (200 ml)

ECO-Universal Oil Package chemically connects to the molecules of metallic surfaces and forms а microscopically thin reaction film (protective shield), preventing welding of the friction metal parts. The result is а continuous and complete smoothening of the surfaces. This smoothening causes extraordinary emergency running properties and wear reduction, improves bearing and adhesive properties of lubricating film, provides sliding of metal parts without friction.

Advantages
- Protection of engine and transmission against wear. The wear rate is reduced by 2 times at least (compared with oil).
- Fuel saving up to 15%.
- Protection lasts up to 60 000 km or 1000 hours running time.
- Improved engine power, reduced oil consumption, compression restore.
- Reduction of engine and transmission noises. Reduced exhaust emissions.
- High light-run characteristics. Smoother switching operations.
- Excellent emergency running properties.
- Lower engine and gear oil temperature.
- Increased service life.
- Reduced operational costs.

Application
Universal lubricating oil additive ECO-Universal Oil Package is for use in:
- Engines of new and used foreign cars
- Manual transmissions (MT).
- Automatic transmissions (AT: 3, 4, 5, 6, 7 - speed automatic, DSG, robotized transmissions).
- Differentials, axles, transfer cases.
- Power steering (PS).
- Car bearings.

ECO-Universal Oil Package contains no solid lubricants. It can be used in any standard mineral and synthetic engine oil, in industrial and hydraulic oils. Suitable for turbo charged engines and catalytic converter equipped engines. Exceeds the following specifications by interacting with base oils: API, CF-4/SHPD/SJ, ACEA A3, B3, ATF/Dexron. For all gasoline, diesel and compressed gas engines, as well as for gears, industrial oils and hydraulic systems. Also suitable for lubricated clutches of motorcycles, agricultural and construction machinery.

Application in IC-engines: Prepare new engine oil and oil filter according to the car manufacturer’s instructions. Fill WINDIGO or Motor Cleaner in the old engine oil. Start the engine, let it run for 15 minutes. Drain the old engine oil, change the oil filter. Add ECO-Universal Oil Package into the canister with the new engine oil, it should make up 5% of the total oil volume. Stir thoroughly. Add the resulting mixture to the engine. Start the engine; let it run for 10 minutes at idle speed.

When applied in a new car engine (mileage up to 60000 km), or immediately after maintenance: Add WINDIGO Universal oil additive in the amount of 5% of the total oil volume in the warm engine. Start the engine; let it run for 10 minutes at idle speed.

Application in MT and AT: Add ECO-Universal Oil Package in the transmission oil in the amount of 5% of the total oil volume.

Application in differentials, axles, transfers cases: Add ECO-Universal Oil Package in the transmission oil in the amount of 5% of the total oil volume.

Application in PS: Add ECO-Universal Oil Package in PS fluid in the amount of 5% of the total PS fluid volume.

Application in bearings: To apply for new or cleaned bearings only. In a separate container mix the grease for bearings and ECO-Universal Oil Package in the amount of 10% of the total grease volume. Stir thoroughly. Fill the resulting mixture in the bearings.