Microceramic Spray (200 ml)

Forms a transparent, high-pressure resistant lubricating film with good adhesion. This film does not drop off under high thermal load and retains its lubricating properties. Transparent lubricant with good adhesion is especially suitable for areas, where the use of a colorless lubricant is required, such as sliding roofs, door locks and hinges, windows, bicycles and kid’s toys etc. Prevents wear and corrosion. Resistant to extremely high loads and temperatures, provides long-term protection against corrosion, resistant to splashes, salt water and temperature changes.

Adhesive Lubricant Spray Micro-Ceramic.

Ceramic-based Adhesive Lubricant Spray is a high-performance transparent adhesive lubricant containing solid ceramic lubricants and suitable for use in any accessible lubrication points, in the household, for gardening and household appliances, tools, in the cars. This lubricant can also be used in the lubrication points of hard access for construction machinery, vehicles and equipment, as well as for lubrication of bicycle and motorcycle chains.
It forms a transparent, high-pressure resistant lubricating film with good adhesion. This film does not drop off under high thermal load and retains its lubricating properties. Transparent lubricant with good adhesion is especially suitable for areas, where the use of a colorless lubricant is required, such as sliding roofs, door locks and hinges, windows, bicycles and kid’s toys etc. Prevents wear and corrosion. Resistant to extremely high loads and temperatures, provides long-term protection against corrosion, resistant to splashes, salt water and temperature changes.
When applied in the high-load lubrication points, such as heavy windows, doors and gates, we recommend you to apply our Spray in several layers allowing 3-5 minutes between coats. This time is needed for the lubricating film to dry after evaporation of the propellant.

Instructions for use in the car’s brake disks:

Convenient to use when the car wheels are changed (2 times a year). Apply Micro-Ceramic Spray on the both sides of the brake disks. Allow to dry for 10 minutes. Attention! At first, after applying Micro-Ceramic Spray, the braking efficiency will be reduced a little, be careful when driving a car. After a few kilometers of driving the braking efficiency will be restored and the brake disks will be reliably protected.

Volume: 200 ml, aerosol can with a standard spray nozzle and an additional long spray nozzle.

The product is shipped by transport companies only!

Attention: Do not use for lubricating of places which may come into contact with food.